I changed sprinkler head after system turned on, mud & rocks got in & head wont work, my mom wants 2 kill me? - sprinkler head trimmer
I bought 2 new sprinklers 1 2 C-1 changed when I did, the system was, and I loved the change was executed 2 of 2 heads and water immediately from the top of the tank in the floor rocks and mud filled the room. The sprinkler head is not really new thread when I tried Vieja 1 2 Make sure that I did not lose my mind and he did. Then again mixed into the system by 2 C if my mother and my sprinkler system to the usual pop and I can hear and feel the mud into it. What should I do and how I can support the mud on the entire system?
Monday, December 7, 2009
Sprinkler Head Trimmer I Changed Sprinkler Head After System Turned On, Mud & Rocks Got In & Head Wont Work, My Mom Wants 2 Kill Me?
Subscribe to:
Post Comments (Atom)
4 comments:
You probably have already, but:
Use a shovel to dig a hole to five liters of spray everything you want to repair. Remove the nozzles. Open the valve, the water, the head of the tube through the mud to escape. Run a few seconds, until the water remains clear, it will be deactivated. Water. Hilo in an elevator. Repeat the above methodology for color. Now on your sprinkler line. Test system before proceeding.
Now works. Be Bond, the remaining water, filling and paid.
You probably have already, but:
Use a shovel to dig a hole to five liters of spray everything you want to repair. Remove the nozzles. Open the valve, the water, the head of the tube through the mud to escape. Run a few seconds, until the water remains clear, it will be deactivated. Water. Hilo in an elevator. Repeat the above methodology for color. Now on your sprinkler line. Test system before proceeding.
Now works. Be Bond, the remaining water, filling and paid.
Two things you can do here
1. Unscrew the top of the head and viscera, and filter the water and blow through one or two seconds to clean up debris on the track. (This would be cleaner, because most of the wastewater used to BACKINT head as well) run. then clean the filter head and put them back together.
2. a big hole to dig and / or a pump for pumping water and ensure that nothing in the line when it is extinguished and only the new thread. We carry our hand pumps in all of our trucks.
This should be easy to fix my friend.
Two things you can do here
1. Unscrew the top of the head and viscera, and filter the water and blow through one or two seconds to clean up debris on the track. (This would be cleaner, because most of the wastewater used to BACKINT head as well) run. then clean the filter head and put them back together.
2. a big hole to dig and / or a pump for pumping water and ensure that nothing in the line when it is extinguished and only the new thread. We carry our hand pumps in all of our trucks.
This should be easy to fix my friend.
Post a Comment